------------------------------------------------ README for the Agilent Technologies ESA Series Signal Analyzers Documentation Set E4401-90427 August 2002 ------------------------------------------------ This readme file contains information regarding the following subjects: - Instructions for using the CD-ROM on a PC and opening the navigation page (Main Menu) - A list of the PDF files on the CD-ROM - A list of the Programming Examples (in ASCII format) located in the prgxmpls directory ========================================== Instructions for using the CD-ROM on a PC ========================================== (If you already have Adobe Acrobat Reader with Search loaded on your PC, go to step 2.) 1. Install Acrobat Reader with Search on your PC. If you have Windows NT or Windows 95, click on Start, Run, and type: D:\ACROBAT\ACROREAD\WIN\Rdr_srch\32BIT\SETUP.EXE (where D: is the drive letter for your CD-ROM drive) If you have Windows 3.1 click on File, Run, and type: D:\ACROBAT\ACROREAD\WIN\Rdr_srch\16BIT\SETUP.EXE (where D: is the drive letter for your CD-ROM drive) 2. This CD-ROM should automatically load, but if it doesn't, you can manually open it by going to D:\mainmenu.pdf. This is the main menu page which contains document descriptions and navigation links to all other documents on the CD-ROM. If you just loaded Adobe Acrobat Reader, you will need to open the CD-ROM drive and close it again so your PC can search for the auto load program. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ A note regarding navigation links in Netscape Navigator: The navigation links in the Main Menu may not function as you expect when Acrobat Reader is launched from Netscape Navigator. See "Reading Embedded PDF files" in the Acrobat Reader Online Guide, available in the Help menu. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ============== PDF Listing ============== mainmenu.pdf - For navigating to other documents on the CD-ROM ESA Standard e4401426.pdf - User's/Programmers Reference e4401437.pdf - Getting Started Guide e4401425.pdf - Measurement Guide and Programming Examples e4401405.pdf - Calibration Guide e4401410.pdf - Instrument messages and Functional Tests e4401408.pdf - Programming Conversion Guide e4401434.pdf - Specifications Guide - E Series e4403032.pdf - Specifications Guide - L Series e4401279.pdf - Programming Compatibility Guide - 8590 Series cdmaOne Measurement Personality (ESA-E Series) e4402006.pdf - User's Guide e4402008.pdf - Measurement Guide e4402009.pdf - Programming Commands GSM Measurement Personality (ESA-E Series) e4402015.pdf - User's Guide e4402017.pdf - Measurement Guide e4402018.pdf - Programming Commands Bluetooth Measurement Personality (ESA-E Series) e4402082.pdf - User's Guide e4402054.pdf - Measurement Guide e4402083.pdf - Programming Commands Modulation Analysis Measurement Personality (ESA-E Series) e4402037.pdf - User's/Programming/Measurement Guide Cable Fault Measurement Personality (ESA-E Series) e4401312.pdf - User's Guide Phase Noise Measurement Personality (ESA-E Series) e4440077.pdf - User's Guide Cable TV Measurement Personality e4401228.pdf - User's Guide ================================= Programming Examples Listing ================================= CD filename Chapter 3 Example Name Acpr.c Adjacent channel Power Measurement Mkrdelta.c Using Marker Delta Mode and Marker Minimum Search mkpksrch.c Using Marker Peak Search and Peak Excursion intalign.c Performing Internal Self-alignment ascigpib.c Reading Trace using ASCII Format (GPIB) 32btgpib.c Reading Trace using 32-bit Real Format (GPIB) ascrs232.c Reading Trace using ASCII Format (RS-232) 32brs232.c Reading Trace using 32-bit Real Format (RS-232) limlines.c Using Limit Lines Noise.c Measuring Noise Amplcorr.c Entering Ampitude Correction Data measdone.c Status Register - Determine When a Measurement is Done error.c Determine if an Error has Occurred harmgpib.c Measuring Harmonic Distortion (GPIB) harmrs23.c Measuring Harmonic Distortion (RS-232) fastmeas.c Making Faster Measurements (multiple measurements)